03 / Radar

Radar and sensor integration

The radar on a working vessel uses its own network protocol. We decode it: the image stream, the tracked targets, the own-ship feed and the control interface. The radar then operates as a component of the system.

A radar plan-position picture: echo returns around the edge, own ship at the centre, and one vessel inside a small box with a dotted track behind it and a line showing its motion Decoded radar picture
Recorded on our own test boat: one antenna turn of radar data, decoded and drawn by our own software, with a camera-confirmed vessel tracked. Rotated and mirrored so the location cannot be identified.
ImageThe full radar image stream, decoded live.
TargetsARPA tracked targets, once per antenna turn.
Own-ship feedWe supply the radar with a 10 Hz heading, position and course feed, built from the vessel’s own NMEA 2000 compass and GPS.
ControlTransmit, standby, range, gain, auto-acquire and guard zones.
TrackingOur own tracker, fused with the camera detector, with a per-session shoreline guard.
One thing we do not use

Raw ARPA velocity is unreliable for moored hulls, so the tracker does not use it. In a harbour, most radar returns come from vessels tied to a quay.